|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
The manual is complete with excellent quality! One suggestion, show number of pages and weather it is multi-lingual. The AD 600 Manuel is about 76 pages and over half is non English. This results in a larger print job than usually needed. Having this information, one could select the desired pages for printing.
 ;
I've been looking for a copy of the original user/owner manual. Just what the doctor ordered, thank you.
;
the manual was very helpful thank you very much no one else was able to help me thanx
;
This is an excellent handbook. We had no information on the appliance until we obtained this and are now able to use the appliance to its full potential. Strongly recommended.
;
Very happy to find this from owners-manual.com and the enclosed spec sheet as well.
Not longer available from Sony.
Troubleshooting
If there is no sound from any of the speakers, check the following: � Receiver/amplifier is on and a source is playing. � Review proper operation of your receiver/amplifier. If there is no sound coming from one speaker, check the following: � Check the �Balance� control on your receiver/amplifier. � Check all wires and connections between receiver/ amplifier and speakers. � Make sure all wires are connected. Make sure none of the speaker wires is frayed, cut, or punctured. If the system plays at low volumes but shuts off as volume is increased, check the following: � Check all wires and connections between receiver/ amplifier and speakers. � Make sure all wires are con nected. Make sure none of the speaker wires is frayed, cut, or punctured. � If more than one pair of main speakers is being used, check the minimum impedance requirements of your receiver/amplifier. If there is low bass output, check the following: � Make sure the polarity (+ and �) of the left and right �Speaker Inputs� are connected properly. If there is no sound from the center speaker, check the following: � Make sure that your receiver�s Center Channel Mode is in the �normal� or �wide� position. If it is in the �phantom� position, the center speaker will not play. � Check all connections between processor/amplifier and the center speaker.
|
|
|
> |
|
